Recuperator accessories

Recuperator controller Brink Air Control:

Fan speed regulation;
Recuperator working time programming;
Setting ventilation modes;
Filter replacement indicator;
Language selection;
Fault mapping;
Timing;
Warranty: 2 years.

Suitable for all BRINK Renovent recuperators. 

The Zehnder ComfoAir Q ventilation unit can be integrated with EIB/KNX building management systems. The only component required is the Zehnder ComfoConnect KNX C interface. This device establishes a connection between the Zehnder ComfoAir Q ventilation unit and the KNX building management system. In this way, the ventilation unit can be monitored and controlled using KNX devices. In addition, the device also allows you to control the main Zehnder ComfoHood kitchen hood. The device can be mounted on any wall. Zehnder ComfoConnect KNX C is connected to the ventilation unit with a 4-wire ComfoNET cable. Additional drivers or components can be added without customizing the KNX installation. Assigning addresses to the KNX integrator is much easier thanks to the dynamic address allocation of ETS 5 (not included).

The Zehnder ComfoSense C67 is a four position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications.

Key Benefits:

4 separate ventilation flow rate options to select in 1 controller 7 day flow rate programmer Summer bypass indicator Frost protection indicator Service and Maintenance alert Clock function User menu access RF bridge to enable use of the CCRFZ (655 000 755) controller 

Suitable for recuperators: Zehnder ComfoAir Q350/450/600.

Extension tube suitable for mini recuperator Zehnder ComfoAir 70;
Length, mm: 600;
Diameter, mm: 250. 

NordicPanel is a control panel with a touch screen that is connected to the product with a 4-conductor cable. NordicPanel has the following functions: Adjustment, temperature adjustment, speed selection, timed forcing, home/away selection, alarm code display, alarm reset. NordicPanel is suitable for: EcoNordic and Nordic units manufactured after 1/10-2022. To easily see if the unit is compatible, there should be a cable on top of the unit labeled "NordicPanel". In some cases, you may need to update the software on the unit for the panel to work, this can be done via the FlexitGO app. It is also possible to install NordicPanel on older Nordic (not EcoNordic) units manufactured between May 2019 and September 2022, then there is a cable kit to buy, contact the nearest dealer for more info.

Selectable functionality on the home screen; Intuitive user interface; Language neutral; Fits in standard wall mounted device box.

Wanas UMECTO 1300 UNI humidifier cartridge. Easy to use. 

Color may vary depending on the batch. 

The humidifier is designed to work with all air handling units. The device is used to maintain the required humidity in the building. The action is based on the natural process of water evaporation, this process is the most beneficial for our health, and is also very energy-efficient. This solution ensures the maintenance of humidity in the building during the winter, when the humidity is low. Properly installed device does not require any maintenance apart from periodic replacement of the steam mat.

Thanks to the new configuration, the device can be connected to any existing installation and any recuperator. The humidifier is installed on the supply air duct of the ventilation system and is an independent device. It is controlled by a controller mounted at the top, which is standard equipment of every WANAS UNI humidifier. Due to the combination with the wireless miniControl sensor, humidity control is easy and fully automatic. 

Brink Home is an external module that can be connected to the recuperators Brink Renovent Sky and Brink Renovent Excellent. This allows remote control of the device with a smartphone, tablet or computer. It connects to the Internet via Wi-Fi or an Internet cable. 

The TPC V2 control panel is used for the control of ventilation units with PRV2 and MCB type boards.  

TPC V2 5m remote control panel can be used with MCB and PRV2 type control boards.

Suitable units:

RIS EKO 3.0 RIRS EKO 3.0 Smarty 

The ST-SA-Control control panel is used for the control of ventilation units with MCB-type and PRV2 type control boards.  

Suitable units:

RIS EKO 3.0 RIRS EKO 3.0 Smarty AmberAir Compact AmberAir. 

Intended for Domekt air handling unit with C6, C8 control system Simple control Operation modes Touch-sensitive screen Integrated thermometer and hygrometer Extremely thin – only 12 mm 3 ways of mounting

Removes polluted air from the stove and maintains air balance indoors.
Minimalist design.
Painted white.
With energy-saving LED lighting.
It is additionally equipped with a decorative panel. 

It will be clear that air pollution is a problem that we all have to deal with. Air pollution comes in various shapes and sizes. One of those is fine dust. Anywhere in the world where there is traffic or industry, fine dust is released. It is even in the countryside air. Fine dust consists of the very smallest particles that differ in size, origin and composition. Research shows that breathing in fine dust is harmful to health. The smaller the particles, the further they penetrate the body. With the Pure induct, Brink offers a solution that keeps these tiny particles out while your home is fully ventilated with the best and cleanest air possible.